This product is vital when dyeing leather, it promotes the penetration of the paint leather. Apply the primer with a foam pad, tapping it into the leather. Or in spraying it using a compressor. Leave to dry for between 15 and 30 mn., then apply the Resicolor. The primer is a polyurethane liquid with extraordinary adhesive properties. Applied to leather one step before the resicolor.

EAN13 3537799284467

The primer attachment is essential to achieve good color leather. It promotes penetration resicolor (painting leather) in the leather. Apply PREFOND with a foam pad by tapping the leather, or by spraying by means of a compressor provided with a gun 30 cm. Let dry 15 to 30 minutes, proceed with the application of resicolor following. Before application, perform a test on a hidden area. Check that no alteration appears in the treatment area. If in doubt, contact us.

R11 Highly flammable. R20/21/22 Harmful by inhalation, in contact with skin and if swallowed. R22 Harmful if swallowed. R36 Irritating to eyes. R36/38 Irritating to eyes and skin. R67 Vapours may cause drowsiness and dizziness.